General's Armoury x Easy & Simple LVOA Rifle and GRY Rifle

[chpo]

Item N°

General’s Armoury x Easy & Simple

• GA0001 A
• GA0002 A

Partlist:

GA0001 A

• War Sport LVOA-Carbine (FG)
• Magpul UBR Collapsible Stock
• NATO STANAG Mag 5.56×45mm (30rd)
• Magpul EMAG 5.56×45mm (30rd) x4
• Leupold Mark 4 HAMR
• Magpul PTS MBUS Flip Up Sight
• SureFire M600 Weapon Light
• Magul XTM Foregrip
• Picatinny Rails Short x2
• Picatinny Rails Long x2
• String x2
• Weapon Rack

GA0002 A

• SAI GRY-Carbine (GRAY)
• Magpul MOE SL Carbine Stock
• SOCOM Gear Lancer L5 AWM 5.56×45mm (30rd)
• NATO STANAG Mag 5.56×45mm (30rd) x3
• SAI Proprietary JailBrake Muzzle
• Aimpoint Micro T-2 2MOA w/ Scalarworks LEAP/MICRO Mount
• Troy Industries Folding Battle Sights
• Magpul XTM Foregrip
• SureFire SOCOM 556 Mini Monster
• Picatinny Rails Short x2
• Picatinny Rails Long x2

In the past several companies released boxed items in collaboration with E&S like Green Wolf Gear, MSE and General’s Armoury.

GA released two rifles so far, which I gonna take a closer look at in this review.

I got them both shipped loose. For the boxart please have a look here:

The GA0001 comes with an E&S weapon rack, the GA0002 like the Doomsday Rifles not anymore. Hope E&S leaves it that way.

The plain rifles

With the JailBrake muzzle off.

Fire selector

SAFE
SEMI
AUTO

Magpul MOE SL stock and the pin

UBR stock and the pin. I didn’t take off the covers from the stock, because I was afraid to break it!

The barrels

Brand logo: WAR SPORT

Salient Arms

Was a pain to get these threats through the tiny holes. Worse then putting cloth gloves on bendy hands

Closer look at the Jailbreak and the standard muzzle

The pin located at 6 o’clock…

…has to be inserted into the hole under the muzzle.

I got the Vortex from the GA0002 version B, because it looks nicer to me than the Micro T-2. For the GA0001 I just got the SRS loose because it’s almost unique and excels the Artfigures one from the Soldiers of Fortune 3 figure by far!

GA0001 A HAMR Scope

GA0001 B Trijicon SRS (Sealed Reflex Sight)

Artfigures SRS for comparison

GA0002 A Aimpoint Micro T-2

GA0002 B Vortex Razor HD

SureFire SOCOM 556 Mini Monster with glass breaker (GA0002 only)

GA0001 Magpul PTS MBUS

GA0002 DOA Folding Sights

Magpul XTM

SureFire M600 GA0001

Provided mags from both versions

5,56 mm

Geared up my way

With silencer

Original scope

With SRS from GA0001 Version B

General's Armoury x Easy & Simple GA0001 Low Visibility Assault Rifle

A款 - 绿色/Foliage Green Parts List : 1x Low Visibility Assault Rifle 1x HAMR Scope 1x MBUS Iron Sights 1x XTM Fore Grip 1x M600 Weapon Light 1x Weapon Bungee (DIY) 1x Long Picatinny Rail 2x Short Picatinny Rail 1x STANAG 4x E-Mags 1x Weapon Display Stan [1] [2] [3] [4] [5] [6] [7] [8] B款 - 黑色/Black Parts List : 1x Low Visibility Assault Rifle 1x SRS Scope 1x MBUS Iron Sights 1x XTM Fore Grip 1x M600 Weapon Light 1x Weapon Bungee (DIY) 1x Long Picatinny Rail 2x Short Pi…

General’s Armoury x Easy & Simple GA0002 Global Response Rifle

[1] [2] [3] [4] GA0002A Global Response Rifle (GREY) Aimpoint Micro T-2 TBS Iron Sights XTM Fore Grip Suppressor Jailbreak Weapon Head Long Picatinny Rail x2 Short Picatinny Rail x2 STANAG x3 Lancer L5 Mag [5] [6] [7] [8] GA0002B Global Response Rifle (BLK) Vortex Razor HD TBS Iron Sights XTM Fore Grip Suppressor Jailbreak Weapon Head Long Picatinny Rail x2 Short Picatinny Rail x2 STANAG x3 Lancer L5 Mag [9] [10] [11] [12] [grafik]

[Suicide_Commando]

Nice photos of two nice sets. Thanks.

[AdamC]

Vortex should be the Razer HD, which has been getting notoriety after reference photos of CAG guys using it.

[chpo]

Razer HD

I’ll correct that. Thanks

[chpo]

After some time I realized the stock of the GA0002 is kind of a pain. The stock always becomes loose on mine. There is this pin, General Sam advised to push in deeper for a better hold, however it wears off and doesn’t work for me anymore. Pushing the plastic pin constantly makes it degrading. I just removed it for now thinking of a better way for the stock to remain in place. Some hard work, because there was little plastic left to grab with tweezers.

I just wish there would be a better way to adjust this.

[AdamC]

I’m generally not a fan of how they implement this on their buffer tubes as the pins often aren’t long enough or the recess on the buffer tube isn’t deep enough. You could always drill it (if needed) with a pin vise and then pin it with some brass rod or something like that. Usually I just do something like use a bit of tape to make the fit of the stock tighter or a bit of blu-tac.

[chpo]

pin it with some brass rod or something like that

That would be ideal, I guess. Keeps the option to remove the pin easily, when taking off the stock. I’ll try to work on that.

[davinator65]

General’s Armoury x Easy & Simple

Great pics! Thanks for sharing chpo.